PA10/HT Serial (RS232) Humidity/Temperature Sensor
This device is a low cost serial (RS232) temperature/humidity sensor for monitoring temperature and humidity in an indoor environment. Easily interface with any PC or controller that has an RS232 serial port available.
The PA10/HT Sensor connects via cable to an RS-232 serial port on your computer and can be located up to a thousand feet away without the need for a battery or external power adapter. This Pike Aero device, like all of our sensors, uses our unique Pike Aero auto discovery protocol that insures a quick and easy installation.
Download PA10 User's Guide
- Server Room
- Wiring Closet
- Equipment Room
- Radio Room
- Inside equipment and machinery
- Quality assurance labs
- Connects to any RS232 serial port
- Windows, Unix, Linux, and Mac software available
- Auto discovery protocol insures that no setup is required
- 16 bit CRC error detection and correction.
- Locate PA10/HT Thermometer up to 1000 ft. from computer
- No power supply required, the PA10/HT Thermometer is powered from the serial port
Measurement/Operating Temperature Range: -40 º C to +85 º C (-40 º F to +185 º F), %0-100 RH
Housing Dimensions: 9.6 cm (3.8") x 4.2 cm (1.7") x 2 cm (0.8")
Housing Material: injection molded ABS thermoplastic
Housing Colour: bone white
Sensor type: semiconductor
Communications connector: 9 position DB9F
Power source: Data line-powered (RTS and DTR, both asserted) or via External DC power connector
Power supply current: < 10 mA
External power supply voltage: 5 - 12.0 VDC
Communications Interface: RS232 using TX,RX,RTS,DTR and GND.
Maximum communications cable length: 305 m (1000 ft.) using low capacitance shielded cable.
Communications Protocol: Pike Aero Protocol (PAP), Version 2.0
Error control: 16 bit error detection and correction.
Writen at 01. July 2012 by pikeaero