PA10/T Serial (RS232) Temperature Sensor
This device is a low cost serial (RS232) temperature sensor for monitoring ambient air temperature in an indoor environment. Easily interface with any PC or controller that has an RS232 serial port available.
The PA10/T Sensor connects via DB9 terminated data cable to an RS-232 serial port on your computer and can be located up to a thousand feet away without the need for a battery or external power adapter. This Pike Aero device, like all of our sensors, uses our unique Pike Aero auto discovery protocol that insures a quick and easy installation.
Download PA10 User's Guide
- Server Room
- Wiring Closet
- Equipment Room
- Radio Room
- Inside equipment and machinery
- Quality assurance labs
- Connects to any RS232 serial port
- Windows, Unix, Linux, and Mac software available
- Auto discovery protocol insures that no setup is required
- 16 bit CRC error detection and correction.
- Locate PA10/T Thermometer up to 1000 ft. from computer
- No power supply required, the PA10/T Thermometer is powered from the serial port
Measurement/Operating Temperature Range: -40 º C to +85 º C (-40 º F to +185 º F)
Housing Dimensions: 9.6 cm (3.8") x 4.2 cm (1.7") x 2 cm (0.8")
Housing Material: injection molded ABS thermoplastic
Housing Colour: bone white
Sensor type: semiconductor
Communications connector: 9 position DB9F
Power source: Data line-powered (RTS and DTR, both asserted) or via External DC power connector
Power supply current: < 10 mA
External power supply voltage: 5.5 - 12.0 VDC
Communications Interface: RS232 using TX,RX,RTS,DTR and GND.
Maximum communications cable length: 305 m (1000 ft.) using low capacitance shielded cable.
Communications Protocol: Pike Aero Protocol (PAP), Version 2.0
Error control: 16 bit error detection and correction.
Writen at 01. July 2012 by pikeaero